Sheet Metal Processing

System Upgrade

Bi Series （Bending Indicator）

Bi-J Automated bending angle correction system

The Bending Indicator is a high-speed/ high-precision bending sensor for bending machines with AMNC/PC

Specifications

	Angle check range	Angle correction accuracy	Sheet thickness (mm)	Sheet	V-groove width (mm)
Bi-J	90°～150°	±15′【HDS‐NT】	1.0～6.0	SPCC・SECC acid washed material	6～40
Bi-S	80°～165°	±15′【HD‐NT】	1.0～6.0	Steel・SUS・AL	6～40
Bi-L	60°～150°	±30′【HD‐NT】	1.0～12	Steel・SUS・AL	6～125

Laser Safe

Shut-down device for worker safety

Specifications

	Applicable models
LZS	Can be retrofit to bending machines with AMNC/PC

Work follower series

Liberation from heavy bending work

Specifications

	Sheet thickness (mm)	Work-piece dimensions (mm)	Capacity (kg)	Auto following angle
SF1012T	0.5～6.0	Min: 300×300 Max: 1000×2000	50/1 axis (100/2 axis)	40～48° (Enabled 90°bending during automatic operation) Obtuse angle bend is possible in sensor mode
SF1012TL	0.5～6.0	Min: 300×300 Max: 1000×2000	50/1 axis (100/2 axis)
SF1548H	0.6～6.0	Min: 700×700 Max: 1250×2500	150	0～70°

NC9-mini

Back gauge & depth control device for RG-Z II

Specifications

	Applicable models	Control method	Control axis	Input system	Feed speed
NC9-mini	RG-25～125	Micro computer	2	D axis: Touch panel playback	D axis: 9 stages (8～600mm/min) L axis: Max.5m/min

Work sensor attachment

Prevents defective dimensions caused by back gauge errors, one type of defective processing of bending products. We have also prepared a work sensor with uneven tips.

Supported models

HDS-NT Series / AMNC/PC_Ver.5or later

Load control

Eliminate material thickness variations, changes in machine with time and machine-dependent differences, and produce the objective angle from the first curve, just by changing the table stop signal from Measure (Position) to Scale (load).

Supported models

HDS-NT Series / AMNC/PC_Ver.5or later

TDS

AMADA's TDS system is a system for detecting material thickness variations as a load change and controlling the D axis. Supports stabilization of the finish angle.

Supported models

HDS-NT Series / AMNC/PC_Ver.5or later

*This product is for the Japanese market.
For any inquires, please contact local AMADA branch office.

Bending Machines Top｜ HG Series｜ HG-ATC Series｜ HRB Series｜ HRB-ATC Series
HD-NT Series｜ EG Series｜ RG-M2 Series｜ EG-6013AR｜ HG-1003ARs
HG-1303Rm｜ HG-2204Rh｜ EP Series｜ System Upgrade｜ Bending Tooling