Sheet Metal Processing

Tooling

Amada Modular Tooling System (HDS recommended)

Punches Model	Effective height (mm)	Tip radius (mm)	Tip angle
MT-10	90/120	0.2/0.6	88°/90°
MT-12
MT-14
MT-28	90/120/170
MT-36	90/120/170		30°
MT-46	90/120		88°/90°
Dies Model	Effective height (mm)	Tip radius (mm)	Tip angle	V-groove width (mm)
MT-704	30/80	0.4/1.0	88°/90°	4
MT-705		0.4/1.0		5
MT-706		0.4/1.5		6
MT-707		0.5/1.5		7
MT-708		0.5/1.5		8
MT-710		0.6/2.0		10
MT-712		0.8/2.5		12
MT-714				14
MT-716				16
MT-718		1		18
MT-720				20
MT-725				25
MT-506			30°	6
MT-508				8
MT-510				10

Model	Clamp specification	Tooling	Machine models	Interlock
ZⅡ (H=120mm:punch holder height)	Dual position(front/rear clamping plate can be removed)	One-touch tooling	Bending machines with table length between 1.2 - 8m & SPH	Standard equipped in FBD III-NT

Model	Die fix method	Tooling (die)	Holder length (mm)	Holder length (mm)
Hydraulic 1V die holder (FBD III recommended)	Clamping plate drive method with hydraulic pressure	Amada standard divided 1V die / Amada die (mounting width 14mm)	1250～4000 (connect two for table lengths of 2.5m or more)	H=51.5 (from table top)

	Height (mm)	Tip angle: Tip radius	Size (mm)	Tooling hardness
Punch	H=120	90°：0.2R 86°：0.2R/0.6R 30°：0.2R/0.6R	L:835 S:415 sectionalized:10×2/15/20/25/ 40/50/100×2 Total 370	HRC47±2 (30°Acute angle direct-sword : HRC60±2)
	Height (mm)	Sheet thickness (mm)	Size (mm)	Tooling hardness
Die	H=60	SPCC/AL/SUS： 0.5～3.2	L:835 S:415 sectionalized: 10×2/15/20/25/ 40/50/100×2 Total 370	HRC47±2

*For Japan domestic market.
For any inquires, please contact local AMADA branch office.