Products

Product Information

300W - 600W YAG Laser Welders

Laser Welders | ML2550A image

ML-2550A ML-2551A
ML-2552A ML-2650B
ML-2651B

Well-equipped features and high-power enable high-speed and high-quality welding!

  • Feature
  • Specification
  • External view
  • Sample

Features

  • Welding with a few heat-affected area can be done due to that laser welding is "contactless" welding.
  • Real-time Power Feedback feature ensures stable welding under optimum weld conditions.
  • Employing an optical fiber makes its automation easy.
  • High power oscillator enables high speed seam welding.
  • Up to four energy sharing.
  • Controller is detachable.

Standard Features

  • Real-time power feedback
  • Variable mirrors
  • Waveform control
  • Power monitor
  • Controller
  • External communications
  • Fade-in / Fade-out

Real-time Power Feedback Feature

Laser Welders | Real-time Power Feedback Feature

Laser Welders | Real-time Power Feedback Feature

  • What you set is what you get

    Thanks to the output power feedback system, the exact laser output power can be obtained just as you set on the unit. In addition, the output power and output waveform are displayed on the controller's monitor.

  • Automatic correction of the pumping energy

    Since the energy fed to the lamp is automatically corrected, there is no need for bothersome adjustment, even thought the laser output would be fluctuated caused by some reasons, such as lamp's deterioration and thermal lens effect on the YAG rod.

  • The configured output power with the waveform will be provided just as set from the first shot

    Since the desired laser output in the right waveform is applied to the work from the first shot, there is no need for "warming-up" shots before the actual welding.

High efficiency delivery balance without power loss

Laser Welders | High efficiency delivery balance without power loss

The newly adopted variable mirror eliminates the laser power loss and brings balance of deliveries which is resulted in a significant improvement in beam splitting precision.
Maximum of up to 4 deliveries of optical fibers can be connected (Chargeable option) either on the top side or backside of the laser unit.

Interface designed for workability

Laser Welders | Interface

Welding initiated by an external start signal can be modified with the local controller during operation. Since the controller can be detached from the main unit, it can be operated at your hand. The start response time can be set in five different times within 0.1 to 16.0ms. Also, conditions can be switched to another during the response time.

Advanced waveform control functions

Laser Welders | Waveform control

With the waveform control functions there are two modes, Fix mode which is based on a 3-step waveforms, and Flex mode where you can set up to 20 inflexion points to create complex waveforms. Since the optimum welding schedules can be set depending on the various materials, blow holes and cracks can be avoided and the welding quality will be improved.

High-speed, high-quality welding

High-speed seam welding is possible with high repetition rate of up to 500pps. Also, power feedback control and waveform control functions enable high-quality welding for a variety of work-pieces.

Laser Welders | High-speed, high-quality welding

Operation section controller

The controller is detachable from the main unit and can be operated by hand. Large color touchscreen is equipped for ML-2600 series.

Supports factory automation easily

These devices are equipped with a wealth of input/output terminals (signals), so they can be easily connected to automatic equipment.

Optical fiber delivery system

A maximum of four branches are possible, including energy sharing and time sharing. (Optional)

  • Feature
  • Specification
  • External view
  • Sample